2016 Lexus NX 200t Check Engine Light

Is it safe to drive your 2016 Lexus NX 200t with the check engine light on?

If the check engine light is flashing, this means that there is a compelling issue and it is recommended to service your Lexus NX 200t immediately. This question is not very classic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is constantly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more fascinating problem. Call the experts at Nalley Lexus Smyrna by dialing 7706187908 so you can describe the issues. Or cut your speed and bring your 2016 Lexus to our certified mechanics as soon as careful.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more draconian failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it low-cost to get the relevant code reading and diagnosis. The average cost for a check engine light diagnosis & testing is naturally between $88 and $111. The low-cost news, Nalley Lexus Smyrna offers complimentary multi-point inspections and free diagnostics, in most cases, to help designate the cause of your check engine light.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2016 Lexus NX 200t is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few diversified ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Lexus NX 200t. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can indicate a variety of chance things. It can be as visible as your gas cap being loose or as unsafe as engine knocking. If your check engine light is on in your 2016 Lexus NX 200t, contact Nalley Lexus Smyrna. Contact Nalley Lexus Smyrna today! Our Lexus service department can help you find out what code is turning your check engine light on or probe why your check engine light is shining.

2016 Lexus NX 200t Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard expeditiously illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also noted as the OBD (on-board computer diagnostic system) in your NX 200t. There are hundreds of divergent codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling helpful diagnostics will give you advantageous knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, discernable and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of usable OBD codes, there are also hundreds of usable reasons for the light, including:

• Transmission issues
• Bad Spark Plugs
• Computer output circuit issues
• Old Battery
• Ignition system faults
• Loose Gas Cap or Missing Gas Cap
• Emissions controls issues
• Fuel and air metering systems problems
• O2 Sensor

This is why it is acceptable for someone who does not have various of automotive knowledge to not assume what a code means. Call Nalley Lexus Smyrna at 7706187908 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out hastily by a certified Lexus mechanic. If the engine light comes on due to a hazardous concern, you risk damaging your car further by not repairing the issue right away.

What could cause the check engine light to come on in a 2016 Lexus NX 200t?

When your check engine light comes on, this could be as commonplace as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a relentless problem that could cause relentless damage to your engine and come with a enormous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less relentless but a blinking check engine light indicates that your vehicle’s engine is in relentless trouble and service is fundamental shortly. If your check engine light is blinking in your 2016 Lexus NX 200t, we particularly advise not to drive the vehicle and schedule Lexus service today. Below is a list of the most commonplace reasons your check engine light can come on:

• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, admitted as the O2 sensor, measures the fee of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less direct when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your 2016 Lexus NX 200t's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to elect for the right mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
• Your 2016 Lexus NX 200t has a vacuum leak. Every Lexus NX 200t has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower down damaging emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to important heat or extreme freezing.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Lexus NX 200t is what determines how much fuel is mandatory to run your engine efficiently by measuring the fee of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to understandable changes, like altitude. If your Lexus NX 200t is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
• New Spark Plugs or Plug Wires are mandatory for your 2016 Lexus NX 200t. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or old, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, best to more expensive repairs.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or distinct item can wreak havoc on your 2016 Lexus NX 200t if it’s not installed properly. These aftermarket parts and accessories can discard the battery, trigger the check engine light, or even avert the vehicle from starting. If these issues sound commonplace, bring your NX 200t to Lexus and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get low work and wear and tear caused by low installation work corrected.
• The battery is low or dead. The battery in your 2016 Lexus NX 200t is every vital. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The price of a new one depends on the type of Lexus you drive, but check our current service coupons and specials.
• Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2016 Lexus NX 200t’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Nalley Lexus Smyrna offers a complimentary multi-point inspection with every Lexus service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Lexus NX 200t will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause distinct problems from overheating.
• One of the most prevalent and frequent cause is that your 2016 Lexus NX 200t gas cap is loose, damaged or missing. The gas cap for your 2016 Lexus NX 200t serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on suddenly after you put gas in your 2016 Lexus NX 200t, first thing you should check is to make bold the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

2016 Lexus NX 200t Check Engine Light

A flashing light indicates that the problem is unsafe and if not taken care of immediately may result in prime damage to the car. If the check engine light in your 2016 Lexus NX 200t starts flashing, that means that the problem needs sudden attention and your Lexus should be brought in immediately. This flashing light usually expresses a strict engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where damage is competent, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can completely be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If your check engine light is flashing, please contact our team of automotive experts at Nalley Lexus Smyrna straightaway by calling 7706187908. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a excessively expensive repair.

2016 Lexus NX 200t Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are many regular causes including something as plain as a loose gas cap. Extra regular reasons for a Check Engine Light are damaged oxygen sensor, a malfunction with the fuel injection system, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Lexus Certified Technicians and the certified service protocol to isolate the root problem and repair it as essential to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Lexus issue was fixed.

Every 2016 Lexus NX 200t was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its paramount systems. The sensors are continually detecting conditions while sending data to the electronic control company. If the electronic control company detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is remorseful nor what to do about it. That’s where we come in; Nalley Lexus Smyrna provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Particularly Qualified Service experienced.

How many miles can you drive with the check engine light?

If you check engine light is twinkling, we recommend that you pull over and contact Nalley Lexus Smyrna to help select if your vehicle is safe to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how plentiful miles you can drive with the warning light on.

Will the check engine light reset itself?

The check engine light on your 2016 Lexus NX 200t will usually shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going feasible, and you did assorted of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Lexus NX 200t light will go off after about 20-40 miles. If you drive over that payment and the light is still on, you will need to bring it in to Nalley Lexus Smyrna so the light and code can be double-checked and reset.

Check Engine Light Service 2016 Lexus NX 200t

What do you do when you’re driving along in your Lexus NX 200t and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Lexus owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Lexus NX 200t checked as soon as careful. Ignoring that warning could end up causing notable break to expensive engine components.

When your 2016 Lexus NX 200t's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t handy, a computer turns on your check engine light. This amber or yellow light is often labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic inspect tool that is used by our Lexus auto repair mechanics at Nalley Lexus Smyrna. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced licensed to indicate the issue and repair it.